Internet of Things

Read the RFID Tag value and prints in the serial Monitor Pin Configuration RFID Reader Arduino…

July 12, 2016

Internet of Things

Relay Introduction A relay is an electromagnetic switch operated by a relatively small electric current that can turn on or…

July 11, 2016

Internet of Things

Introduction The Zigbee S2 module runs native Zigbee protocol (Don’t use the S1 module which doesn’t have config). There are…

July 6, 2016

Internet of Things

The HC-05 can be interfaced using the Serial protocol. Note: There are other modules which are very similar like HC-08 and they…

July 4, 2016

Internet of Things

The GSM module has the SIM900A microcontroller, a SIM slot, a 12V input, RS232 (Serial) interface and Pin outs for…

June 24, 2016

Internet of Things

Library The GPS Sensor requires the TinyGPS library which can be downloaded here – [TinyGPSPlus-0.94b] Note The GPS module talks…

June 21, 2016

Internet of Things

Download the following Library to work with ENC28j60 ethercard Circuit Ethernet Module Arduino SS …

June 15, 2016

Internet of Things

Creating Server using Ethernet Point to be noted If router allocates dynamic IP then use it in the browser to…

June 14, 2016

Internet of Things

Any aspiring IOT device needs to be connected to the internet. When a WiFi connection is nearby (say home, hotspot…

May 26, 2016

Internet of Things

Circuit Arduino Sensor 5V 5V (Ultrasonic) GND GND (Ultrasonic), Black Wire (Buzzer) Pin 12 Trigger Pin (Ultrasonic) Pin 11…

May 25, 2016

Internet of Things

The DHT11 is a pre-calibrated digital output temperature and humidity sensor. The sensor sends both the temperature and humidity information on…

May 20, 2016

Internet of Things

The LCD Keypad shield is developed for Arduino compatible boards, to provide a user-friendly interface that allows users to go…

May 18, 2016